RAM Mounts Tab-Tite Tablet Holder for Panasonic Toughpad FZ-G1

SKU
RAM-HOL-TAB19U
£60.47
In stock
Only 2 left
RAM Tab-Tite Tablet Holder for Panasonic Toughpad FZ-G1
The RAM-HOL-TAB19U consists of a spring loaded back plate and custom support cups for the Panasonic Toughpad FZ-G1. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB19U is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Note: If your tablet has an extended battery or handstrap integrated in the back, a set of risers ( RAM-HOL-TAB-RISER1U or RAM-HOL-TAB-RISER2U ) may be required to offset the cups to accomodate the added thickness. Cradle Dimensions: Height: 10.75" to 13.375" Width: 6.5" to 7.75" Depth: 0.13" to 0.93"
SKU RAM-HOL-TAB19U
EAN 0793442941221
Specification
Design
Mobile device typeTablet/UMPC
CompatibilityAmazon Fire HD 10 with Case
ASUS MeMO Pad FHD 10 with Case
ASUS Transformer Pad with Case
Dell Venue 11 Pro with Case
Dell Venue 11 Pro 7000 with Case
HP ElitePad 900 with Case
Lenovo Tab A10 with Case
Lenovo ThinkPad 10 with Case
Lenovo Yoga Tablet 10 with Case
Lenovo Yoga Tablet 10 HD+ with Case
Panasonic Toughpad FZ-G1
TypePassive holder
Proper useCar
Product colourBlack
Multimedia
Built-in speaker(s)No
Ergonomics
Minimum device width16.5 cm
Maximum device width17.8 cm
Minimum device depth3.3 mm
Maximum device depth2.36 cm
Minimum device height25.4 cm
Maximum device height33 cm
Built-in chargerNo
Technical details
Mobile device typeTablet/UMPC
CompatibilityAmazon Fire HD 10 with Case
ASUS MeMO Pad FHD 10 with Case
ASUS Transformer Pad with Case
Dell Venue 11 Pro with Case
Dell Venue 11 Pro 7000 with Case
HP ElitePad 900 with Case
Lenovo Tab A10 with Case
Lenovo ThinkPad 10 with Case
Lenovo Yoga Tablet 10 with Case
Lenovo Yoga Tablet 10 HD+ with Case
Panasonic Toughpad FZ-G1
TypePassive holder
Proper useCar
Product colourBlack
Minimum device width16.5 cm
Maximum device width17.8 cm
Minimum device depth3.3 mm
Maximum device depth2.36 cm
Minimum device height25.4 cm
Maximum device height33 cm
Built-in chargerNo
System requirements
Minimum device width16.5 cm
Maximum device width17.8 cm
Minimum device depth3.3 mm
Maximum device depth2.36 cm
Minimum device height25.4 cm
Maximum device height33 cm
Power
Power source typeNot supported
Built-in chargerNo
Audio
Built-in speaker(s)No
Packaging data
Quantity per pack1 pc(s)
Manufacturer RAM Mounts
In Stock Y